• Leadscrew Pin - Myford ML7 & Super 7

New hardened and ground 5/32" diameter leadscrew pin to fit through the small hole at the end of the leadscrew on both the Myford ML7 and Super 7 and is used to either drive the leadscrew from the hand wheel (if fitted) or locate the distance sleeve.

P Hucknall | Rating: 5
Parts as described with very rapid deliver; S7 now running again! Cheers

Write a review

Note: HTML is not translated!
    Bad           Good

Leadscrew Pin - Myford ML7 & Super 7

  • £0.62