Home :: Log In ::

Search

Categories

Myford ML7 Spares->Myford Super 7 Spares-> Bed, Leadscrew and Gear Train Carriage, Apron and Top Slide Headstock Assembly Motorising Assembly Tailstock Assembly Myford ML10 Spares Myford Accessories and Chucks Drive Belts - Myford Keys and pins->Fixings, Fasteners & Circlips->Slide Adjusting Screws/lock nuts Books Knobs and Handles Oil & Lubrication Paint - Myford Lathe Setup/measuring tools etc->

Home :: Myford Super 7 Spares :: Motorising Assembly

Motorising Assembly

In this section you will find a selection of Myford Super 7 spare parts relating to the motorising assembly, including the countershaft assembly and guards etc.

Displaying 1 to 10 (of 13 products)

1 2 [Next >>]

Manufacturer	Product Image	Item Name	Price
		Circlip Anderton 1300 1 9/16" (New) This large internal circlip fits either side of the Myford Super 7 countershaft twin vee pulley to retain the bearings (ref Anderton 1300 1...	£0.98 Add:
		Circlip Anderton 1400 5/8" New circlip to fit on the far left hand side over the 5/8" diameter part of the Myford Super 7 countershaft - (ref Anderton 1400 5/8")	£0.35 Add:
		Circlip Anderton 1400 7/8" New circlip to fit on the left hand side of the countershaft pulley over the 7/8" diameter part of the Myford Super 7 countershaft - (ref...	£0.47 Add:
Myford		Countershaft Swing Head - Super 7 Myford Super 7 Swing head assembly in serviceable condition and minimal wear in the bushes. Customers outside Europe please Contact us for shipping...	£34.50 Add:
		Drive Pin Rivets No 0 x 1/4" New hardened steel brass plated hammer in drive pin rivets (Ref No 0 x 1/4") used throughout the Myford lathe for holding on name plates and...	£0.08 Add:
Myford		Motor Tie bar Assembly - Super7/ML7R Myford Super 7 and ML7R motor tie bar assembly including tie bar, clamp screw, nut, washer and clamp screw head.	£6.95 Add:
Myford		Pivot Pin (Motor Platform) - Super 7/ML7R Pivot Pin for the Myford Super 7 and ML7R motor platform. This is the pin that runs through the motor platform and allows it to pivot.	£2.50 Add:
		Woodruff Key - 1/8" New woodruff Key - 1/8" thick (ref No 404) to replace most keys on both the ML7 and Super 7 except the ML7 countershaft keys which can be found...	£0.48 Add:
		1 1/4" (32mm) Spherical Knob x 5/16 BSW Brand new top quality hard plastic 1 1/4" (32mm) diameter spherical knob with 5/16" BSW threaded hole to fit onto the following levers;...	£1.95 Add:
		Motor Drive Belt - Super 7 Brand new top quality motor drive belt for the Myford Super 7 and ML7R lathe.	£3.97 Add:

Displaying 1 to 10 (of 13 products)

1 2 [Next >>]

Currencies

Information

paypal verified

Home

Your IP Address is: 38.107.179.208

Copyright © 2012 Lathe Spares