Home :: Log In ::

Search

Categories

Myford ML7 Spares->Myford Super 7 Spares-> Bed, Leadscrew and Gear Train Carriage, Apron and Top Slide Headstock Assembly Motorising Assembly Tailstock Assembly Myford ML10 Spares Myford Accessories and Chucks Drive Belts - Myford Keys and pins->Fixings, Fasteners & Circlips->Slide Adjusting Screws/lock nuts Books Knobs and Handles Oil & Lubrication Paint - Myford Lathe Setup/measuring tools etc->

Home :: Myford Super 7 Spares :: Headstock Assembly

Headstock Assembly

In this section you will find a selection of Myford Super 7 parts relating to the headstock assembly, including the spindle, bearings, gears and levers etc

Displaying 1 to 10 (of 11 products)

1 2 [Next >>]

Manufacturer	Product Image	Item Name	Price
Myford		30T Spindle Gear - Super 7 30 tooth spindle gear to fit theMyford Super 7 and ML7R. This gear is located an the far left of the spindle and is used to drive the tumbler gears;...	£14.95 Add:
Myford		Backgear Eccentric - Super 7 Backgear Eccentric for the Myford Super 7. The backgear eccentric shaft fits in a hole in the front of the headstock under the chuck and is part of...	£11.95 Add:
SKF		Headstock Spindle Bearings (pair) - Super 7 Brand new set of 2 matched Myford Super 7 rear spindle angular contact bearings - please note that these are top quality bearings made by SKF and not...	£34.50 Add:
Myford		Vee Cone Pulley Assembly - Super 7 Vee Cone Pulley Assembly - Myford Super 7 The vee cone pulley assembly fits over the headstock spindle; it is in very good condition with no damage...	£39.00 Add:
		Woodruff Key - 1/8" New woodruff Key - 1/8" thick (ref No 404) to replace most keys on both the ML7 and Super 7 except the ML7 countershaft keys which can be found...	£0.48 Add:
		Nuto H32 Lubricating oil Nuto H32 Lubricating oil 0.5l for use on the Myford ML7, ML7-R, Super 7, ML10, 254 and older Myford lathes. For lubrication the headstock spindle,...	£5.95 Add:
		1" (25mm) Spherical Knob x 3/16 BSW Brand New top quality hard plastic 1" (25mm) diameter spherical knob with 3/16" BSW threaded hole to fit onto the following levers; Super 7...	£1.85 Add:
		Headstock Belt - Super 7 Brand new top quality headstock drive belt for the Myford Super 7 and ML7R lathe - this belt drives the headstock pulley from the countershaft.	£3.95 Add:
Fenner		Headstock Belt (Easy Fit Link Type) - Super 7 Top quality brand new Fenner link belt to fit the Myford Super 7 and ML7R headstock to countershaft pulley. This type of belt has many advantages...	£17.95 Add:
		2BA Oil Nipple New 2BA oil nipples to replace missing, damaged or worn oil nipples throughout the Myford lathe.	£0.62 Add:

Displaying 1 to 10 (of 11 products)

1 2 [Next >>]

Currencies

Information

paypal verified

Home

Your IP Address is: 38.107.179.208

Copyright © 2012 Lathe Spares