Carriage, Apron and Top Slide

In this section you will find a selection of spare parts for the Myford Super 7 carriage, apron and top slide.




Manufacturer Product Image Item Name Price
2BA Oil Nipple

2BA Oil Nipple

New 2BA oil nipples to replace missing, damaged or worn oil nipples throughout the Myford lathe.
£0.62

Add:

Myford Adjusting Collar (Cross/Top Slide) - Super 7

Adjusting Collar (Cross/Top Slide) - Super 7

This is a adjusting collar for the Myford Super 7 lathe, it screws over the cross slide or top slide feed screw to hold it in position and locks with...
£3.50

Add:

Myford Adjusting Collar Cross Slide - Late Super 7

Adjusting Collar Cross Slide - Late Super 7

Cross slide feedscrew adjusting collar (part No A9191) including copper pad for the later power cross feed Super 7.
£3.50

Add:

Myford Ball Handle Diaphragm washer

Ball Handle Diaphragm washer

The diaphragm washer fits between the ball handle and the micrometer dial on both the cross and top slide of the Super 7 lathe, it exerts a small...
£1.75

Add:

Ball Handle Securing Screw

Ball Handle Securing Screw

Myford Super 7 chrome plated ball handle securing screw - the screw screws into the end of the feed screw on both the top and cross slide to secure...
£1.95

Add:

Ball spring replacement oil nipple

Ball spring replacement oil nipple

New good quality drive in nipples are used to replace the old 1/4" flush ball spring oilers as fitted to older myford lathes - simply remove the...
£0.45

Add:

Ball spring replacement oil nipple - Concave

Ball spring replacement oil nipple - Concave

Concave Drive fit nipples are used to replace the old 1/4" flush ball spring oilers as fitted to older myford lathes - simply remove the old...
£0.68

Add:

Myford Cam and Lever - Super 7

Cam and Lever - Super 7

Myford Super 7 cam and lever, the lever is located on the front of the apron and is used to engage the power feed to the carriage; the lever is in...
£9.95

Add:

Myford Cam Peg for Leadscrew nut

Cam Peg for Leadscrew nut

The cam peg screws into the leadscrew nut and slides in a track on the inside of the leadscrew engage lever, engaging/disengaging the nut when the...
£0.32

Add:

Cross Slide Adjusting Screw

Cross Slide Adjusting Screw

New 2BA adjusting screw for the Myford ML7 and Super 7 cross slide - used in conjunction with the 2BA lock nut
£0.39

Add:



Your IP Address is: 38.107.191.83
Copyright © 2010 Lathe Spares