Home :: Log In ::

Search

Categories

Myford ML7 Spares->Myford Super 7 Spares-> Bed, Leadscrew and Gear Train Carriage, Apron and Top Slide Headstock Assembly Motorising Assembly Tailstock Assembly Myford ML10 Spares Myford Accessories and Chucks Drive Belts - Myford Keys and pins->Fixings, Fasteners & Circlips->Slide Adjusting Screws/lock nuts Books Knobs and Handles Oil & Lubrication Paint - Myford Lathe Setup/measuring tools etc->

Home :: Myford Super 7 Spares :: Bed, Leadscrew and Gear Train

Bed, Leadscrew and Gear Train

In this section you will find a selection of Myford Super 7 parts relating to the lathe bed, leadscrew and gear train assembly.

Displaying 1 to 9 (of 9 products)

Manufacturer	Product Image	Item Name	Price
Myford		Change Gear Guard - Super 7 The change gear guard is for the Myford Super 7 lathe, it is in very good condition with no cracks and a nice clear screw cutting chart on the inside...	£38.00 Add:
Myford		Change Gear Guard - Super 7 The change gear guard is for the Myford Super 7 lathe, it is in very good condition with no cracks.	£38.00 Add:
Myford		Change Gear Quadrant - Myford Myford change gear quadrant for both the Myford ML7 and Super 7 Lathe. Apart from replacing a lost or damaged quadrant it would also be very useful...	£16.50 Add:
		Drive Pin Rivets No 0 x 1/4" New hardened steel brass plated hammer in drive pin rivets (Ref No 0 x 1/4") used throughout the Myford lathe for holding on name plates and...	£0.08 Add:
		Repair bush set for L/H leadscrew bracket Repair bush set to replace worn or damaged bushes in the left hand leadscrew bracket on the Myford ML7 and Super 7 lathe.	£6.85 Add:
		Repair bush set for R/H leadscrew bracket Repair bush set to replace worn or damaged bushes in the right hand leadscrew bracket on the Myford ML7 and Super 7 lathe.	£5.95 Add:
		Woodruff Key - 1/8" New woodruff Key - 1/8" thick (ref No 404) to replace most keys on both the ML7 and Super 7 except the ML7 countershaft keys which can be found...	£0.48 Add:
		2BA Oil Nipple New 2BA oil nipples to replace missing, damaged or worn oil nipples throughout the Myford lathe.	£0.62 Add:
		Ball spring replacement oil nipple New good quality drive in nipples are used to replace the old 1/4" flush ball spring oilers as fitted to older myford lathes - simply remove the...	£0.45 Add:

Displaying 1 to 9 (of 9 products)

Currencies

Information

paypal verified

Home

Your IP Address is: 38.107.179.210

Copyright © 2012 Lathe Spares