Myford ML7 carriage and top slide spare parts

Carriage, Apron and Top slide

In this section you will find a selection of Myford ML7 spare parts associated with the carriage, apron and top slide assembly.

Manufacturer

Product Image

Item Name

Price

Ball spring replacement oil nipple

New good quality drive in nipples are used to replace the old 1/4" flush ball spring oilers as fitted to older myford lathes - simply remove the...

£0.45

Add:

Ball spring replacement oil nipple - Concave

Concave Drive fit nipples are used to replace the old 1/4" flush ball spring oilers as fitted to older myford lathes - simply remove the old...

£0.68

Add:

Myford

Cam Peg for Leadscrew nut

The cam peg screws into the leadscrew nut and slides in a track on the inside of the leadscrew engage lever, engaging/disengaging the nut when the...

£0.32

Add:

Myford

Carriage Cam & Lever Assembly - ML7

The cam lever fits on the front of the apron on the Myford ML7 lathe and engages the power feed to the carriage; the lever is in good condition with...

£7.95

Add:

Cross Slide Adjusting Screw

New 2BA adjusting screw for the Myford ML7 and Super 7 cross slide - used in conjunction with the 2BA lock nut

£0.39

Add:

Myford

Front Saddle Strip - reground ML7

Front saddle strip for the ML7 carriage - the strip has been reground and demagnetised.

£8.95

Add:

Myford

Gear Cover Assembly Refurbished

Refurbished gear cover assembly - the assembly had had a new bush fitted and re-painted in Myford grey. The cover fits on the inner side of the apron...

£4.95

Add:

Myford