Home :: Log In ::

Search

Categories

Myford ML7 Spares->Myford Super 7 Spares->Myford ML10 Spares Myford Accessories and Chucks Drive Belts - Myford Keys and pins->Fixings, Fasteners & Circlips->Slide Adjusting Screws/lock nuts Books Knobs and Handles Oil & Lubrication Paint - Myford Lathe Setup/measuring tools etc->

Home :: Myford

Myford

Displaying 1 to 10 (of 29 products)

1 2 3 [Next >>]

Manufacturer	Product Image	Item Name	Price
Myford		25T Spindle Gear - ML7 Myford ML7 25 tooth spindle gear - this gear fits over the end of the spindle and drives the tumbler gears, the gear is in very good condition with...	£7.50 Add:
Myford		30T Spindle Gear - Super 7 30 tooth spindle gear to fit theMyford Super 7 and ML7R. This gear is located an the far left of the spindle and is used to drive the tumbler gears;...	£14.95 Add:
Myford		Backgear Assembly 65T inc Key - ML7 Myford ML7 Backgear Assembly in excellent very lightly used condition with no wear or damage to the gear teeth or key.	£45.00 Add:
Myford		Backgear Eccentric - Super 7 Backgear Eccentric for the Myford Super 7. The backgear eccentric shaft fits in a hole in the front of the headstock under the chuck and is part of...	£11.95 Add:
Myford		Cam and Lever - Super 7 Myford Super 7 cam and lever, the lever is located on the front of the apron and is used to engage the power feed to the carriage; the lever is in...	£9.95 Add:
Myford		Carriage Cam & Lever Assembly - ML7 The cam lever fits on the front of the apron on the Myford ML7 lathe and engages the power feed to the carriage; the lever is in good condition with...	£9.95 Add:
Myford		Catch Plate - Myford This is an original Myford 4 1/2" diameter catch plate; used in conjunction with a drive dog when turning between centres. The plate will fit...	£24.50 Add:
Myford		Change Gear Guard - Super 7 The change gear guard is for the Myford Super 7 lathe, it is in very good condition with no cracks and a nice clear screw cutting chart on the inside...	£38.00 Add:
Myford		Change Gear Guard - Super 7 The change gear guard is for the Myford Super 7 lathe, it is in very good condition with no cracks.	£38.00 Add:
Myford		Change Gear Quadrant - Myford Myford change gear quadrant for both the Myford ML7 and Super 7 Lathe. Apart from replacing a lost or damaged quadrant it would also be very useful...	£16.50 Add:

Displaying 1 to 10 (of 29 products)

1 2 3 [Next >>]

Currencies

Information

paypal verified

Home

Your IP Address is: 38.107.179.206

Copyright © 2012 Lathe Spares